The Next Generation in Holiday Lighting Controllers and Accessories
Our goal is to further the hobby!


Renard Plus LCC-16


Standard board


Torpedo Board


Features

The Renard Plus LLC 16 is a low cost 16 channel controller with integrated ACSSRs designed to drive low power (<0.6A per channel) AC loads. Unlike other Renard designs like the Renard 64XC, the Renard Plus LCC 16 makes use of a different PIC, the PIC18F2525. This design also uses a VO2223 power TRIAC which replaces both the optoisolator and the TRIAC's in traditional Renard designs. This allows a smaller board and lower total cost.

  • Supports standard Renard protocol
  • 16 dimmable low current output channels
  • Diming from 0% to 100%
  • Fading from 1 to 255
  • Controlled from PC using Vixen or Light Show software
  • RS485 controlled
  • Can be daisy chained with Renard controllers
  • Designed to fit into CG cases using existing holes
  • Reduced parts count, less building errors
  • Lower cost to build than the Renard Plus TR16
  • Either 120 or 220 voltage input
  • 2 Input AC buses rated at 6 amps each (12 amp total)
  • Program PIC on board using standard ICSP header
  • REN-W header (No board modifications required to use Xbee wireless)
  • Onboard diagnostic LED's (active all of the time)
  • DMX capable
  • Pic Bypass
  • Removable RS485 terminator
  • Uses newer 32 Mhz PIC on a single chip
Supporting Documents


 Renard Plus LCC16 Assembly Manual v2.00

Availability

Bare boards can be purchased anytime from our shop.

You may also order all of the parts from Mouser using this Link
Renard Plus.
Last update: 04/29/2016, 09:35:41
Page Maintained by: